Solution to Feeding Fault of NC Straightening Machine

The normal operation of machinery and equipment are supported by the various parts of the parts to achieve, when some parts of the problem, the operation of the equipment will be a corresponding failure.
For the straightening machine, any straight cut off work has a premise, that is feeding. Feeding is also by straightening the machine itself to carry out, but that is in front of this step, often there will be many problems, the most common is not feeding or feeding slow.
There are many reasons for this failure, where the author for a little analysis. First of all there are some special reasons, such as card material or power, these with the straightening machine itself is not much relationship, is caused by objective factors. Transfer sprocket off key or chain off is more common, encountered this kind of words as long as a little check, re-fixed like. The wheel in the delivery box may also fall off, the treatment method and the former one, but if it is damaged, then it should be replaced. Preset machine too much force, which may be related to the force when the operation has a certain relationship, as long as the right place to find can be resolved. In addition to these problems, the feed wheel will appear to suppress the phenomenon, you can try to adjust the amount of material or directly replace the larger feed wheel.